Termo 60
The TERMO 60 system is intended for making windows (opening inside), doors (opening inside and outside) and fixed walls. It is a profile system with an interrupted thermal bridge, basic installation depths of 60 and 68 mm. In addition to the basic frame / sash design with straight lines, a frame / sash design with rounded outer lines is also possible. Interruption of the thermal bridge is achieved with polyamide strips of 24 and 26 mm. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / m2K) are installed in the profile chambers and such profiles are named in the letter F. Sealing is performed with EPDM seals. Possible types of window opening: hinged, hinged, hinged-hinged. Possible types of door opening: inward and outward opening. The system is compatible with facade systems. Possibility to select profiles with groove 16/9. The hardware that is installed in the system is standard for the Euro/ groove 15/20 and for the groove 16/9.
Technical characteristics of the system:
- frame depth: 60 and 68 mm
- wing depth: 68 mm
- filling depth: up to 54 mm
- polyamide strips: 24 and 26 mm
- wing weight: 130 kg
- air permeability: EN 12207 (class 4)
- watertightness: EN 12208 (class E900)
- wind resistance: EN 12210 (class C4 / B4)
- noise protection: EN ISO 717 1 (Rw = 39 dB)
- burglary resistance: EN 1627 (RC2)
- calculation of Uw coefficient: DIN EN ISO 10077 2 (≥1.2 Wm² / K)
- base material: EN AW 6060
- polyamide tape material: PA66 GF25
- sealing material: EPDM
- surface treatment: DIN 17611
- quality control: DIN EN ISO 9001
