Termo 85
The TERMO 85 system is intended for the production of windows (opening inside and outside), doors (opening inside and outside) and fixed walls. It is a profile system with an interrupted thermal bridge, basic installation depths of 77 and 85 mm. In addition to the basic frame / sash design with straight lines, frame / sash versions with rounded outer lines are also possible. By applying new materials that have extremely thermally good characteristics, this system meets the criteria of openings for low-energy houses. Interruption of the thermal bridge is achieved by polyamide strips of low coefficient of thermal conductivity (ʎ = 0.210 W / mK) of 34 mm. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / mK) are installed in the profile chambers and such profiles are given the letter F. The sealing is made of spongy EPDM which has a much better thermal properties relative to EPDM seals. Possible types of window opening: hinged, hinged, hinged-hinged, hinged opening outwards, hinged around the middle axis. Possible types of door opening: inward and outward opening. The system is compatible with facade systems. Possibility to select profiles with groove 16/13. The hardware that is installed in the system is standard for the 15/20 Euro groove and the 16/13 groove.
Technical characteristics of the system:
- frame depth: 77 and 85 mm
- wing depth: 85 mm
- filling depth: up to 71 mm
- polyamide tapes: 34 mm
- maxwing weight: 130 kg
- air permeability: EN 12207 (class 4)
- watertightness: EN 12208 (class E1200)
- wind resistance: EN 12210 (class C5 / B5)
- noise protection: EN ISO 717 1 (Rw = 37 50 dB)
- anti-burglary: EN 1627 (RC2, RC3, RC4)
- calculation of Uw coefficient: DIN EN ISO 10077 2 (≥1.0 Wm² / K)
- base material: EN AW 6060
- polyamide tape material: Low Lambda PA66 GF25
- sealing material: spongy EPDM
- surface treatment: DIN 17611
- quality control: DIN EN ISO 9001
