Termo 85 SK
The TERMO 85 SK system is intended for making windows, balcony doors (opening inside) and fixed walls. It is a profile system with an interrupted thermal bridge, with a basic installation depth of 82 mm. This system is characterized by a wing, which, thanks to its shape, is completely integrated into the frame from the outside. Thus, the visible width of the window profile is reduced only to the width of the frame, without the width of the sash as in other window systems. Interruption of the thermal bridge is achieved with 34 mm polyamide strips. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / m2K) are installed in the profile chambers and such profiles are named in the letter F. Sealing is performed with EPDM seals. Possible types of window opening: hinged, hinged, hinged-hinged. The system is compatible with facade systems. The hardware that is installed in the system is standard for the Euro/ groove 15/20.
Technical characteristics of the system:
- frame depth: 82 mm
- wing depth: 85 mm
- filling depth: up to 44 mm
- polyamide tapes: 34 mm
- maxwing weight: 130 kg
- air permeability: EN 12207 (class 4)
- watertightness: EN 12208 (class E 900)
- wind resistance: EN 12210 (class C4 / B4)
- noise protection: EN ISO 7171 (Rw = 44 dB)
- burglary resistance: EN 1627 (RC2)
- calculation of Uw coefficient: DIN EN ISO 100772 (≥1.3 Wm² / K)
- base material: EN AW6060
- polyamide tape material: PA66 GF25
- sealing material: EPDM
- surface treatment: DIN 17611
- quality control: DIN EN ISO 9001
The system is intended for making windows (opening inside), doors (opening inside and outside) and fixed walls. It is a profile system with an interrupted thermal bridge. In addition to the basic frame / sash design with straight lines, a frame / sash design with rounded outer lines is also possible. Interruption of the thermal bridge is achieved by polyamide strips. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / m2K) are installed in the profile chambers and such profiles are given the letter F.
